How to make a wooden toy gun yourself. Create a great gift for your kids. How to make a pistol out of wood? How to make a p2000 gun from plywood

Shooting toys can be bought at the store without any problems, but you can successfully make them yourself. On the pages of the site Secret of the Master are considered various designs cool toys from the simplest to the more complex ones, which, in addition to playing and experimental purposes, can be of practical use, for example, in protecting the harvest from pests in the country.

How to make an office gun with your own hands

A simple cannon design invented for "office wars". The projectile is a sheet of paper crumpled into a ball or a light ball. The cannon does not allow direct fire, but it shoots great with a canopy, which allows you to bypass obstacles in the form of office partitions;). The gun is easily made by hand from plastic bottle and office supplies. For details, see the video and.

How to make a rubber-shooter pistol with your own hands

Rubber Shotgun

Simple wooden automatic three-round pistol. A pistol conveniently in hand. Sawed out of plywood with a hand jigsaw, only 4 parts need to be cut. The pistol shoots rubber bands. With such a gun, it is easy to organize a small airsoft in an apartment or on the street. We look at the pistol stencil drawings (link at the end of the blog). Load your homemade pistol carefully according to the instructions. For safety reasons, wear safety glasses.

How to make a vortex gun with your own hands

A wonderful weapon for children to play and experiment. The cannon shoots ... air, an invisible toroidal vortex bursts out of the barrel, which moves in the direction of the shot for a certain distance. A safe thing for a child to play with weapons and remote "destruction" of toy buildings. Construction details are shown in the video and.

How to make a pneumatic machine gun with your own hands

If you have an air compressor with a receiver on the farm, then you have every opportunity to make a game console for the compressor. The weapon is adapted for the available ammunition - mountain ash and peas and, accordingly, the machine guns were called mountain ash and pea launcher. The design of a homemade machine gun is simple. It is based on manual airflow, which makes it easy to control the weapon. See the video for manufacturing details.

How to make a gas cannon with your own hands

When repeating this design, strictly follow the safety rules. You build gas cannon at your own risk and risk and assume ALL responsibility for the construction, use, consequences of using this device, as well as for the damage caused. The authors summarized the accumulated experience of building potato guns and tried to use ready-made elements in the design. In total, three types of guns of different calibers were designed.

Mini gun caliber 32 mm

The gun is made by hand in the shape of a pistol and shoots small balls. A reliable piezo spark source won't be a problem. Cannon pistol is used for target shooting competition. Requires some experience when loading. For manufacturing details, see

Gas apple potato cannon caliber 50 mm

Gas cannon

This is a serious design in terms of sound and projectile. The main application is to simulate the sound of a shot of a hunting rifle to scare away birds. A reliable budget gun, but only if used correctly and sparingly. Strictly follow the safety regulations and assembly guidelines. How to make an Apple Gun watch

All photos from the article

Very often it is required to make dummies of weapons or toys for children, and plywood as a material is excellent for these purposes. In this review, we will tell you about some types of products and figure out how to make them yourself. There are simpler, and there are more complex models, but with a certain perseverance, you can master any of the options described below.

What you need to work

To make certain products, you need to have the required materials and tools on hand. Of course, the list may differ significantly, we will list only the most basic components, which are almost always at hand anyway:

Plywood	For work, you can use and various waste, the main thing is that their size is sufficient for a particular design. It is important to choose the optimal thickness for a particular design, sometimes reliability is very important, especially if the products will be subjected to high loads
Tool	First of all, these are devices for cutting, you can use both ordinary hacksaws and power tools. Often it is required to make grooves in the surface, for this chisels and carpentry knives are used. Sanding is done with ordinary sandpaper, it is better to use options with different grain sizes to achieve the best result
Protective compounds	Plywood consists of wood, which is better additionally protected from moisture. Also, to make the products more similar to the originals, they are painted black or steel, the main thing is to choose a wear-resistant paint that fits well on the wood
Glue	In order to fasten and fix individual elements, special compounds are used, it can be either ordinary PVA glue or epoxy resin. For the most durable joints, high-strength modern compositions based on bakelite are used

Important!
It is better to use high-quality plywood rather than grade 3 and 4 materials, as they both look worse and have lower strength values.

Some types of products and their features

We note right away that not all products are legal, since plywood brass knuckles are a weapon that can be injured, and you can be prosecuted for wearing it. We will only tell you about those options that can be done without any restrictions.

Constructors

This option is suitable for those who like to collect 3D models or want to make an unusual and interesting gift to your child.

Consider the example of a pistol:

• First you need to find all the necessary schemes... As you know, such products consist of many component parts, so it is very important to find a very high-quality drawing, which will consist of patterns of all the required elements. The more detailed it is, the better the final result will be;

• Next, using a carbon copy, you need to transfer the contours of all elements to plywood, do it carefully with a pen or a sharp pointer... The lines can be made more distinct with a pencil, it is important to achieve good visibility;
• Cutting is best done with or a stationary tool, the jigsaw is suitable for rough processing and it is inconvenient to work with it when cutting out small elements. Try to do everything as carefully as possible;

Pistol is one of the favorite toys of children, but the problem is that most purchased toys break after a very short time. Today, we want to show you how to make a pistol with your own hands from wood, which will be very difficult to break. It can be used not only as a toy, but also in martial arts training, because it is often taught there how to behave with dangerous peopleholding a gun.

How to make a gun at home?

To make a pistol, we will have to work on it a lot, but very little materials are needed. We only need a piece of wood, 20x12 centimeters in size, 2.5 centimeters thick, also do not forget about the layout, which must be printed on a sheet of paper. Let's start making our pistol!

1. First of all, the model of the pistol needs to be transferred to the tree so that further we can see what needs to be cut off and where.

2. When the layout is drawn, we can see that the extra parts can be cut off. Using a jigsaw, cut them off.

3. In our case, a jigsaw was used, but you can even use a regular one.

5. After grinding, we clamp the pistol in teski, and using a spiral saw, cut a hole where the trigger should be.

7. Do not forget the same, to finally give the shape of the trigger, for this you can use a rasp.

8. You can also make notches on the barrel, such as your own on a real pistol.

9. We can cut out smaller parts with a chisel.

10. At the end of everything, the entire gun needs to be sanded with fine sandpaper, and then polished with a zero.

All photos from the article

Very often it is required to make dummies of weapons or toys for children, and plywood as a material is excellent for these purposes. In this review, we will tell you about some types of products and figure out how to make them yourself. There are simpler, and there are more complex models, but with a certain perseverance, you can master any of the options described below.

What you need to work

To make certain products, you need to have the required materials and tools on hand. Of course, the list may differ significantly, we will list only the most basic components, which are almost always at hand anyway:

Plywood	For work, you can use various waste, the main thing is that their size is sufficient for a particular design. It is important to choose the optimal thickness for a particular design, sometimes reliability is very important, especially if the products will be subjected to high loads
Tool	First of all, these are devices for cutting, you can use both ordinary hacksaws and power tools. Often it is required to make grooves in the surface, for this chisels and carpentry knives are used. Sanding is done with ordinary sandpaper, it is better to use options with different grain sizes to achieve the best result
Protective compounds	Plywood consists of wood, which is better additionally protected from moisture. Also, to make the products more similar to the originals, they are painted black or steel, the main thing is to choose a wear-resistant paint that fits well on the wood
Glue	In order to fasten and fix individual elements, special compounds are used, it can be either ordinary PVA glue or epoxy resin. For the most durable joints, high-strength modern compositions based on bakelite are used

Important!
It is better to use high-quality plywood rather than grade 3 and 4 materials, as they both look worse and have lower strength values.

Some types of products and their features

We note right away that not all products are legal, since plywood brass knuckles are a weapon that can be injured, and you can be prosecuted for wearing it. We will only tell you about those options that can be done without any restrictions.

Constructors

This option is suitable for those who like to collect 3D models or want to make an unusual and interesting gift for their child.

Consider the example of a pistol:

• First you need to find all the necessary schemes... As you know, such products consist of many component parts, so it is very important to find a very high-quality drawing, which will consist of patterns of all the required elements. The more detailed it is, the better the final result will be;

• Next, using a carbon copy, you need to transfer the contours of all elements to plywood, do it carefully with a pen or a sharp pointer... The lines can be made more distinct with a pencil, it is important to achieve good visibility;
• Cutting is best done with or a stationary tool, the jigsaw is suitable for rough processing and it is inconvenient to work with it when cutting out small elements. Try to do everything as carefully as possible;

Important!
In order to exclude damage to the ends and their cracking during sawing, it is best to treat the surface with a mixture of PVA glue and water in a ratio of 1: 2.

• The easiest way to do notches is: first, a hole is drilled in size equal to the width of the groove, after which it is cut with a jigsaw;
• The last step is grinding the endsso that they are level and not scratched during assembly.

Dummies

If you are interested in the question of how to make a pistol out of plywood or another type of weapon that will resemble a real one, then this section will help you:

• First of all, you need to find the necessary schemes... Moreover, you will not need drawings of plywood weapons, but real sketches with the exact dimensions and geometry of each element;

• Very often you need to glue several elements together., the instructions for carrying out the work are simple: the pieces are connected with glue and compressed using clamps. The fixation is removed after the composition has completely dried;
• Next, you need to give the blank the shape of the desired product or part of it.... Roughing work is best done with a jigsaw, and if there are holes or openings, then holes are drilled first, and then the desired configuration is given to the groove;
• Then the most difficult and time-consuming part of the process lies ahead - cutting out various elements and giving the surface a realistic look... For this, cutters of the most varied configuration are used; it is better to practice for more simple elementsso as not to spoil the result of the work and not to redo everything again. As a result, you should get exact model original;
• After that, you need to carefully grind the surface in order to round off all planes and give the material perfect smoothness where necessary.... For rough processing, sandpaper M80-M100 is used, for finishing - M180 and finer;

• Finally, in order to give maximum believability, the finished version should be skillfully painted.... The colors are usually the same as the original, so you can buy paints in the desired colors in advance.

In the same way, you can make models of edged weapons, the same plywood sword will be an excellent addition to a child's New Year's costume, and if you make it in full size, you can use it as a training option for those who want to master fencing.

Bows

You can make a bow with your own hands from plywood, and it will be fully functional and you can shoot at targets from it. Of course, creating a long-range hunting option is unlikely to succeed, but please yourself and your children active rest you can.

The work is done as follows:

• For the handle, you need to glue two pieces of 20 mm thick bakelite plywood together, the size of the elements should be approximately 60x400 mm in order to get a full-fledged node;
• After gluing with a jigsaw, the part is given the desired shape, the pattern is best found in specialized literature. Next, you need to give the surface such a relief with a cutter so that it is convenient to hold on during use;

• Holes for M6 bolts are drilled on both sides, which will fix the shoulders... It is best to make them from plywood with a thickness of 16 mm, if you have sheets of 8 mm, then you can glue the two elements with the help of wood glue;
• Pieces of plywood are glued to the ends to make a shelf for the string, after the glue dries, they are given the desired shape and grooves 3 wide and 8-9 mm deep are cut;

• Further, all elements are sanded and coated to protect against moisture... The structure is assembled; for the bowstring, a 3.5 mm thick kevlar sling is purchased from a climbing equipment store. On this question, how to make a bow from plywood can be considered closed.

Butts

If you need to make a stock or, as it is also called, a stock, then plywood can also be a great option.

The works are as follows:

• First of all, you need to glue a couple of pieces of the required size to obtain the required thickness, since standard options are not enough;
• Next, you need to outline the future profile of the product and carry out a rough sawing using a jigsaw;
• The next stage is to cut out a niche for the mechanism, here it is important to do everything as accurately as possible so that the system is fastened securely and correctly, any shifts will lead to the fact that you cannot normally use the weapon;
• Then the surface is given a relief: the bed is rounded, depressions and contours are made, the shape of which can differ significantly. This is meticulous work with a cutter, which takes a lot of time;
• When all the modifications are completed, you can sand the surface and apply a protective compound to it. For example, this is how a plywood stock is made with your own hands.

Conclusion

Plywood is an excellent material for making models, dummies and even full-fledged weapons. It is important to do everything carefully and use quality raw materials, and the video in this article will clearly show some of the work described. If you have any valuable comments or questions on the topic, then ask them in the comments.

A pistol made of wood ... How many words of childhood memories are in this combination ... Memories of how still very young boys and girls chased each other, imagining themselves as robbers and those who catch them. The robbers "shoot" from the simplest toys from a simple piece of wood, it is they who become the first pistols, the first toy weapons made with their own hands. This article will discuss how to make a pistol out of wood.

Making weapons is not only a dream of children

If in childhood you simply took a piece of wood that was suitable in shape, then now you can use special tools and make a toy that is practically no different from a real weapon. If you execute the pistol correctly, it can even shoot. made of wood can please not only boys, but also their fathers.

We start manufacturing

For the manufacture of "weapons" you will need: a piece of rubber drill with a drill no more than 6 mm, a well-sharpened knife, a saw, a file, sandpaper, a knitting needle or a nail of the same length. To understand how to make a pistol out of wood, it is worth knowing that the design of this product is divided into three elements: one-piece grips and barrel, pistons and rubber bands.

First of all, you will need to make the barrel and the handle of the pistol. They need to be cut out of wood and should be at least 2 cm thick. You can choose any shape.

The main thing is that you like it and be comfortable. Do not throw out the remains of the bar, they will still be useful to you.

We continue to answer the question of how to make a pistol out of wood. In the finished barrel, make a full-length hole with a drill. Grind the hole made very carefully with sandpaper. To do this, roll the paper into a tube and put it on a suitable stick, both a long nail and a knitting needle will do. A piston should be made from the remaining piece of wood. It looks like a long wooden stick, slightly less than 6 mm in diameter. There should be a slight bump on one side of the piston. This end will be called the sear. The piston itself must be the entire length of the barrel and freely enter and exit it. An elastic band must be attached to the thickening. It or tape must be cut from a piece of a bicycle tube. Instead of a wooden rod, you can just take a long nail. His hat will serve as a sear. The nail itself must be cut along the length of the trunk, and the place of the cut must be well sanded with a file in order to finally blunt it.

The finished piston is placed in the barrel of the pistol, at the same time it is necessary to pull the rubber band over the handle of the weapon. The sear will need to be adjusted so that when it is pulled back, the trigger is raised. You should also make it so that it can catch on the protrusion on the pistol grip. At the same time, the piston will be firmly fixed in the cocked state. A do-it-yourself pistol made of wood is ready.

We make a training volley

You need to shoot from such a design in this way: the pistol is taken in the hand, the thumb of the hand pushes the sear upward, it slides and moves the piston along the barrel. If you do not know how to make a pistol out of wood, then this article should help you achieve an excellent result.

this question is of interest to quite a few dads and grandfathers who have sons and grandchildren, despite the fact that today in the chains of children's stores you can buy any such toy, based on the wishes of the child, as well as the financial capabilities of his parents.

How to make a homemade pistol out of wood

When a question arises, how to make a homemade gun from wood shooting or not , you can try to show all your imagination and, if you have certain carpentry skills, try to carve it on the basis of a pre-selected suitable wooden blank. It is best to take soft tree species for this, linden or pine is very good in this case, but if you wish, your child's coveted toy can be cut from other species.

As a basis, you should take a board of the right size and thickness, perhaps use materials that were already in use, but for some reason have lost their relevance and importance, for example, part of old furniture or remnants that were not used in the manufacture.

How to make a pistol out of wood: drawing

Of course, any master, when creating a wooden figurine, will rely on a previously completed auxiliary drawing. You can try to find such instructions for the manual in old books on carpentry, do-it-yourself magazines, or use advanced technologies, and look at everything that the resources of the world wide web - the Internet - offer us. And you can also try to draw up a similar drawing yourself. To work in this case, you will need - a sheet of paper, a simple pencil, an eraser (eraser), a ruler, and possibly a compass.

It will be much easier if, as the basis for your future creation, you take a ready-made plastic model of such a toy, which is likely to be found in the house where the boys grow up, and simply remove from it from all possible sides the necessary for building a drawing and further work measurements.

If, however, there is nothing to take measurements from, you can try to draw something yourself. You should not bother with too complex a design, firstly it will take you too much time to create the drawing itself, and secondly, if you do not have a certain amount of knowledge, and your arsenal does not have enough woodworking tools, what was conceived may simply not work out to general disappointment of you and your boy. Therefore, it is enough just to repeat the shape of the pistol, which, by the way, even your child can draw for you.

After the drawing is ready, you can go to work. As in the case of sewing, where the needlewomen, before cutting out the fabric, transfer all the details of the pattern to it, it is better to first schematically transfer the basic forms of the future wooden toy with a simple pencil to the selected base material.

Next, armed with the appropriate tools, you should start making toys. It will take patience, perseverance and accuracy, as well as time. Gradually, layer by layer, a piece of wood will begin to acquire the desired shape in your hands and more and more become like a pistol for children's games.

The instructions of the carpentry masters, as well as video tutorials, will help you to correctly perform all the manipulations. Which you can probably find on the Internet without any problems. To do this, you just need to select one of the search engines, set the phrase there: - " how to make a gun from video tree» , well, or similar and necessary information will immediately be provided to your attention.

When the product is ready, it is better to sand its entire surface so that the wooden base becomes smooth and does not lead to minor injuries such as pricks, splinters, etc. when playing with this toy. Zero abrasive sandpaper is best suited for this purpose.

To make the finished pistol look even more attractive, it can be covered on top, like others, with several layers of varnish. It is better to use acrylic-based varnish in this case, it is safe and non-toxic, which is extremely important in the case of making children's toys. But if you do not have such an environmentally friendly coating at hand, you can also use the traditional one, which is used specifically for wooden surfaces.

Please note that the work on opening the figurine with varnish should be done exclusively in a well-ventilated area, and preferably in the open air, so that harmful vapors of the chemical material do not adversely affect the health of you and your child. For the same reasons, the toy gun should be left to dry out away from living quarters.

Also the pistol can be painted with paints. Here it is advisable to use natural-based dyes - acrylic, gouache or even watercolor. Give your child that much fun and let them choose the color and design of the gun toy themselves. In addition to the fact that such a process will indescribably please your baby, it will also have an extremely favorable effect on his development. After all, this is exactly how, in a playful way, imagination wakes up in children. Skills are developed for accuracy, perseverance, patience, the desire to bring the work started to the end. And even when working with small details and drawing them in the process, the fine motor skills of the fingers are actively involved, which in turn has a positive effect on the mental work of the brain.

How to make a bullet gun out of wood

In order to make such a version of the toy, you must have certain knowledge, tools and skills. One thing can be said unequivocally - creating such a toy is extremely difficult and beyond the power of amateur carpenters, here you have to draw up a lot of drawings and do a lot of complicated, sometimes even jewelry work in order to achieve the intended goal. Therefore, it is better to abandon this idea and dissuade your dreaming child from it. In addition, such a wooden toy pistol can be very dangerous in the hands of a child, and can lead to the most unpredictable consequences ranging from minor injuries and injuries to serious health threats.

But if you still want to try your hand, then it will help you figure out how to make a shooting gun out of wood video, following which you can create your model wooden weapon... However, it should not end up in the hands of a child, for the above reasons, such toys for adults are made exclusively for souvenir purposes and are evaluated only as a delicate and professional work of the master.

Stop at how to make a combat pistol out of wood we will not. Since our article is primarily aimed at making interesting toys for children, and not for adults, but how you can create interesting models quite easily, quickly based on affordable and cheap material for everyone - paper and cardboard, read below. In one of our articles, we told you about, today we will share other equally interesting works.

As you can see, toy weapons for little fidgets can be made from a wide variety of materials, from wood to paper. The main thing is that such fun is safe, interesting and does not arouse hatred and aggression in the child. Therefore, it is better to play less with such samples, preferring something calmer - toy vehicles, outdoor games with sports equipment or educational logic toys.

How to make a shooting pistol?

You can make a shooting pistol completely different ways and from all kinds of materials. A lot depends on the time you are willing to spend on work and on your imagination. It will be easier to follow these instructions if you are familiar with the design of the gun. You can find out about the main components of a pistol from our article. Below are several ways to make a pistol that will fire rubber bands, paper or bullets.

Pistol shooting rubber bands

Materials

You will need:

• 3 wooden BBQ skewers or plywood stick 200 * 10 * 5mm;
• 3 wooden clothespins;
• 2 plastic clothespins (can be replaced with wooden ones);
• stationery rubber bands;
• scissors or knife;
• glue gun or wood glue.

Pistol making process

The technology for making a pistol shooting rubber bands is shown in this video.

Pistol shooting bullets

This unusual toy can be made in a few minutes, and crumpled paper, plastic balls and even pieces of marshmallow can be used as bullets.

Materials

To make such a pistol, you will need:

• polyvinyl chloride pipe - 55 cm, diameter 2 cm;
• 2 PVC corners suitable for diameter;
• 2 PVC tees matching the diameter;
• 2 PVC plugs of suitable diameter;
• scissors for cutting PVC pipes or a sharp knife;
• tape measure or measuring tape;
• soldering iron for PVC pipes.

Build process

A special soldering iron is used to solder pipes, however, some craftsmen heat the ends of PVC products over an open fire, and then connect them. The disadvantage of the latter method is that, if you do not calculate and overheat, the edge of the pipe will melt, and this can reduce the inner diameter of the workpiece. Therefore, it is better to practice a little beforehand.

The gun is ready. The bullet is inserted through the muzzle. To fire a shot, take the pistol by the handles and blow into the hole in the "trigger". The firing range of such a pistol can reach several meters.

Shooting toys can be bought at the store without any problems, but you can successfully make them yourself. On the pages of the Secret of the Master website, various designs of cool toys are considered, from the simplest to the more complex ones, which, in addition to playing and experimental purposes, can be of practical use, for example, in protecting crops from pests in the country.

How to make an office gun with your own hands

A simple cannon design invented for "office wars". The projectile is a sheet of paper crumpled into a ball or a light ball. The cannon does not allow direct fire, but it shoots well with a canopy, which allows you to bypass obstacles in the form of office partitions;). The gun is easily made with your own hands from a plastic bottle and rubber bands. For details, see the video and.

How to make a rubber-shooter pistol with your own hands

Rubber Shotgun

Simple wooden automatic three-round pistol. A pistol conveniently in hand. Sawed out of plywood with a hand jigsaw, only 4 parts need to be cut. The pistol shoots rubber bands. With such a gun, it is easy to organize a small airsoft in an apartment or on the street. We look at the pistol stencil drawings (link at the end of the blog). Load your homemade pistol carefully according to the instructions. For safety reasons, wear safety glasses.

How to make a vortex gun with your own hands

A wonderful weapon for children to play and experiment. The cannon shoots ... air, an invisible toroidal vortex bursts out of the barrel, which moves in the direction of the shot for a certain distance. Safe thing for a child's games with weapons and remote "destruction" of toy buildings. Construction details are shown in the video and.

How to make a pneumatic machine gun with your own hands

If you have an air compressor with a receiver on the farm, then you have every opportunity to make a game console for the compressor. The weapon is adapted for the available ammunition - mountain ash and peas and, accordingly, the machine guns were called mountain ash and pea launcher. The design of a homemade machine gun is simple. It is based on manual airflow, which makes it easy to control the weapon. See the video for manufacturing details.

How to make a gas cannon with your own hands

When repeating this design, strictly follow the safety rules. You build a gas cannon at your own peril and risk and take ALL responsibility for the construction, use, consequences of using this device, as well as for the damage caused. The authors summarized the accumulated experience of building potato guns and tried to use ready-made elements in the design. In total, three types of guns of different calibers were designed.

Mini gun caliber 32 mm

The gun is made by hand in the shape of a pistol and shoots small balls. A reliable piezo spark source won't be a problem. The cannon pistol is used for target shooting competitions. Requires some experience when loading. For manufacturing details, see

Gas apple potato cannon caliber 50 mm

Gas cannon

This is a serious design in terms of sound and projectile. The main application is to simulate the sound of a shot of a hunting rifle to scare away birds. A reliable budget gun, but only if used correctly and sparingly. Strictly follow the safety regulations and assembly guidelines. How to make an Apple Gun watch

Gas mortar caliber 100 mm

An experimental design for firing volumetric light projectiles with electronic filling. Some of the results are shown in the video. When repeating, do not forget that this is not a real mortar, but just a thin-walled plastic pipe. Not all planned experiments have been carried out with this gun and will be published as results are obtained. Shot height record - 80 meters. The mortar in its repetition is the simplest design, see the details in and on the video.

The topic of designing guns is not closed and will be continued.

Sometimes in the relationship between a father and a child, there comes a moment when all the games and entertainment are practically running out. You have to puzzle over the search for new forms of leisure in order to captivate your child as much as possible and not let him get bored. In such cases, the Internet or special printed publications come to the rescue, which contains a huge database of games for every taste and taking into account age characteristics.

How to make a pistol out of wood

One of the proven ways to captivate a child can be military sports games, as in fresh air, and within a house or apartment. Moreover, the most interesting game will be, if all the necessary equipment and ammunition are made by themselves.

The key element in this type of games is weapons, and in particular all kinds of pistols and machine guns. You can use weapons bought in a store, but the most exciting and interesting thing will be to make a pistol out of wood with your own hands. This activity can interest the child and contribute to the development of new skills and abilities. At the stage of preparation for the game, the question may arise about how to make a pistol out of wood. You don't need to have any supernatural abilities for this. The whole process won't seem overly complicated.

Necessary materials

To do this, you will need some tools and materials that can be easily found at home or in the country: a non-solid wood board, a ruler, pencil or pen, a plane, a hacksaw, a file, a vice or clamps, a wood burning machine, sandpaper and varnish. This will be enough to make a homemade wood pistol.

Some stages in the process of making a toy may be within the power of a child. Direct participation in the process of making a pistol will not let him get bored.

Also an important and desirable point in the manufacture of homemade weapons is a drawing of a pistol made of wood. You can easily find it on the Internet or draw it yourself, taking into account all the wishes for the future product.

Making a pistol

At the initial stage, you should take the existing board and select an area on it without knots, holes and damage. The optimum thickness of the wood material should be 30-40 mm. It is desirable that the wood is sufficiently dry, which will facilitate its sanding at the final stage. Using a hacksaw, you need to cut out the necessary workpiece and carefully process its surface with a planer and sandpaper. The thickness of the board should be the same throughout the thickness.

Drawing selection

Having decided on the model and parameters of the pistol, you need to make its drawing or modify the existing one, taking into account all the nuances and wishes. It is possible to use illustrations or photographs of the weapon you like to maximize the reproduction of the smallest details. You can go to specialized forums where they can tell you how to make a pistol out of wood as similar as possible to the original.

The next step will be this: you should transfer the image of the previously made drawing to the existing workpiece while maintaining all parameters and dimensions and taking into account all the smallest details and features of the future pistol. In order to make it convenient to cut a wooden workpiece, it can be fixed in a table vise or using clamps. This will greatly facilitate the manufacturing process of the pistol. It is worth cutting out the parts not strictly along the applied contour, but a little with a margin for finishing.

Workpiece processing

Using a file, sandpaper and a knife, it is necessary to give the product all the features inherent in the weapon, highlight all the necessary and distinctive design details, identify the key elements of a real pistol: the trigger, front sight, butt. On final stage processing the workpiece, you should get a layout that exactly resembles a real gun and corresponds to the image in the drawing. The more the similarity, the more pleasant it will be to hold such an object in your hands.

The final stage

Using sandpaper of varying degrees of roughness, remove all irregularities and roughness, sand all sharp corners.

The presence of a grinding machine or machine can speed up the process of finishing the workpiece. Some details can be highlighted using a woodburner. At the final stage, to give a more aesthetic finished look, the toy should be covered with several layers of dark varnish and allowed to dry well. To add shine and shine, the product can be polished with wax.

By doing this work together with your child, you will not only promote rapprochement, but also teach him how to make a pistol out of wood. In the process of processing wood material, you can acquire some skills that the child did not possess before. And no doubt it is very nice to have something DIY.