Sleep on a laptop. Setting the sleep mode in Windows: What to pay attention to and how to set optimal parameters? Failure when leaving sleep

Most PC users know perfectly well that the enable or turning off the computer may take quite a long time. A little corrected the situation will help sleep mode, turn it on the Windows 10 or other operating system hot keys.

Several ways to translate PC to sleep

1. Power button

If you do not like to turn off the computer, you can reassign the power button of the computer. To do this, go to "Control Panel", open the "Power", click "Setting the Power Plan", then "Change Advanced Power Parameters". Locate the "Power Buttons" and Cover Settings and change the button to sleep.

2. Using the keyboard

Alas, but in Windows operating systems, there is no key combination for sending a computer to sleep, Linux distributions are able to configure the combination of buttons to go to sleep mode. But the task can be solved by consistently pressing several combinations. Roll all the current windows to do this. Windows + M.. Next click hotkeys Alt + F4.The dialog box will appear, allowing you to select "Sleep Mode" using the cursor and the ENTER key.

3. Special key combination with BAT file

In Windows, there is a tricky ability to assign a key combination to open a shortcut. But first create a command file to send a computer to sleep. To do this, create at the root of the disk with a file, for example "shutdown.bat". And write only one line:
Rundll32.exe Powrprof.dll, SetSuspendstate
Now create a shortcut and go to the properties of the shortcut. On the "Label" tab, set the "Quick Challenge" field convenient to you a key combination, for example " Ctrl + Alt + S».

4. Mouse

For manual translation of the computer to sleep using a graphical interface, you will need to go to the "Start" menu, "Turning off the computer", after which you need to select the "Sleep mode" item. To turn on the computer, it is not necessary to move back to the system unit, pressing any button or keyboard shortcut on the input devices (keyboard and mouse) will lead to an awakening of the PC.

In general, sleeping mode is a very good technology that allows you to safely save time on the enable computer and running programs. Therefore, its use is recommended to almost all users, since it is incredibly easy to use it and it will not require any specific knowledge from you.

What is "sleep mode"?

Special operating system function that allows you to stop the computer, without turning it off completely and without closing the included programs. This allows literally in a couple of seconds to re-enable the computer and continue to work, with the result that you will not have to wait a long time to load the system.
Ways to use this functionality.

On most multimedia keyboards there are hot keys that allow you to activate the sleep mode of Windows 7, 8 or even 10. With them, you do not even have to customize anything, because in the keyboard drivers everything is already configured.

In the Windows operating systems, there is an extended setting of sleep. To do this, go to the system parameters, using the "Win + I" key combination. The parameters need to go to the "System" tab and select the "Power and Sleep Mode" menu item.

In it, you can configure the inactivity time of the computer (when no one works for it) during which the backlight will be turned off on the monitor and departure system in sleep.

In most cases, the computer will be able to switch to sleep mode if it does not work for a certain period of time. Although in this case there may be certain exceptions.

In which cases may not work the "Automatic Falling" function?

Automatic transition to sleep mode may not work if any heavy programs or other tasks are executed on a PC (watching movies or listening to music, work computer games, Mounting video and similar actions).

Also, the automatic transition to sleep mode may not work because of problems with drivers of any devices or faults with a keyboard, a mouse, a touchpad and other input devices.

The last problem at which the computer may not work - errors in the programs or the operating system. Poor-quality software, viruses and other malicious software can heat the system strongly, because of which it simply cannot go to sleep.

In this article we will tell about all the most important aspects of the "sleep mode" setting in the Windows 7 operating system.

The topic of the article As you could have noticed very interesting, so I ask you to read the entire post to the end, but only then repeat all the described manipulations with sleep regime.

Below will be presented settings for Windows 7 and Vista.

Setting the sleeping mode

To configure the transition of the computer to sleep mode, after a specified time of lack of activity, you must configure the parameters in the corresponding section "Control Panels".

Open the Start menu and select "Control Panel". If the default is activated to view the panel in the category mode, change it to the "Minor Icons" mode.

Find a link to the item "Power" in the list of elements. Here, as can be seen from the name, the tools are hidden to configure the power supply parameters (if you use a desktop computer, we recommend to activate the standard "Maximum Performance" plan by default).

In order to start setting the sleep mode, click on the "Setting the Power Plan" link, opposite the default plan activated.

The screenshot below shows an example of displaying the settings menu on the laptop. If you configure the desktop computer, the "Power Battery" section will not be displayed.

Select the time interval you need after which the computer will be translated into sleep mode. Graduation - from 1 minute to 5 hours.

If you are using "Sleep Mode" ("Waiting Mode") in Windows 7 or Vista, then probably noticed an unpleasant feature - the slightest movement of the mouse displays a computer from the state of rest (for example, if you accidentally rolling the table).

Disable output from the sleep mode using the mouse

Sometimes it is very annoying. For example, the system can display a computer from a sleep mode while watching movies on the home theater when the high volume of sound effects causes the vibration of furniture.

To get rid of this uncomfortable feature of the system, you must do the following:

• Open the Start menu »
• Control Panel "
• Device Manager "
• Tab "Mice and Other Indicating Devices"

Power Management Tab

Remove the box from the "Allow the device to output a computer from the standby mode" and click OK.

After applying this setting, the computer will no longer be activated from the sleep mode from the random mouse spin.

In the future, to output a system of waiting mode, use the keyboard by simply by clicking on any key.

In the Start menu and in the Power Settings there is no paragraph Sleeping. There is only Completion of work and. How to correct the problem so that the sleep mode appears in the list?

This is how it looks like the example of Windows 10:

• in the Start menu:

• in the actions settings when you press the power button and when closing the lid:

In most cases, this is due to the fact that not installed video adapter driver or multiple drivers .

Launch Device Manager. If in the section Video adapters you see Basic video adapter (Microsoft)., So the video card works on a simplified driver.

Install the native driver from the official site. You can try it to download it through the function. Refresh Drivers:

Wait until the driver installation is completed:

After installing the original driver, the video adapter must contain the manufacturer's name - Intel, AMD or NVIDIA:

Now Sleepingavailable in the system:

Sleeping mode available

We remind you! To work correctly, you must install original Drivers for all devices.

If someone does not know, the constant inclusion and inclusion of a computer or laptop can have a negative impact on the performance of the "iron" components established in them, since it is possible to appear the voltage jumps that displacing equipment. But what to do if the computer is required to perform everyday affairs or at work with some time intervals, and it is not recommended to disable it? This provides for the so-called sleep and hibernation modes. About how the sleep mode or hibernation is configured, and which parameters are most preferred, then it will be discussed. Separately, we will focus on possible issues related to the exhibition of certain options. But for starters, let's see what is the cardinal difference between the modes themselves.

Sleep mode and hibernation: What is the difference?

Sleeping mode is known to most users, since the output times of firstborn in the line of Windows operating systems, which were version 95 and 98.

Only in them initially sleep was only calculated that the electron-ray tubes of monitors did not burn, and screensavers or so-called screensavers were used as the main computer falling asleep. Over time, the dream became necessary in order not to wear the "iron" equipment, which could affect the same voltage jumps, overheating, etc. The hibernation appeared relatively recently (only in Windows Vista) and many were then in the wonder.

What is the difference between ordinary sleep and hibernation? But in the fact that when switching to sleep mode, only those components that do not participate in the conservation of operability are deserved on the computer. this moment Programs, and when using hibernation, the power is turned off for all equipment. Saving these running applications is made in a special Hyberfil.sys file, which is located in the system section and can occupy enough space on the hard disk.

Basic settings of sleep mode in Windows

Now directly about the basic parameters of both modes. You can access them through the control panel in the power supply section. In the case of laptops on which special batteries are installed, to setting the sleep mode in Windows 7 or in any other system, you can get through the PCM menu on the battery icon in the system tray. What is the most interesting: in the menu itself there are screen brightness settings and power management items, but the choice of each of them gives the user to the same section. In this case it does not matter.

First of all, you should pay attention to the power button options (item in the menu on the left). In the basic parameters you can choose several options for action (including sleep). When you go to unavailable at the moment, options for the corresponding link you can additionally set the lock and display the transition point to sleep mode in the start menu.

Additional features for laptops

For laptops in setting the sleep mode, you can select additional options. First, different or identical parameters can be set to work from the network, and from the battery.

Secondly, you can configure the actions performed by the system when you close the lid (you can access these settings and through the main menu in the segment of the power supply). For example, if you set the sleep mode when the lid is closed, the laptop will "fall out" on your own.

Settings for switching to sleep mode and awakening

Along the way, you should pay attention to the display of the display, where you can select a certain time gap, after which the screen goes out automatically. Use such settings on modern for laptop screens or modern monitors, by and large, no sense. Basically such parameters are installed office workers to hide everything that is displayed on the screen.

But if you go directly to the sleep mode configuration item in Windows 10 or in systems below, you can access additional options that are not available in any other section (if you pay close attention to the rest of the parameters, it is easy to notice that most of them are duplicated) .

And here there are many interesting options related to the management of many hardware and software components (hard disk, screen, USB devices, battery, a network adapter, a video card, access to multimedia functions and even the design of the "desktop"). Again, the settings of the sleep mode for laptops in this section are more diverse, but the essence comes down to set the time intervals of the components, allow or prohibit the execution of certain actions.

Separately, it is worth saying that it is very often possible to see the unauthorized awakening of the computer, for example, if you accidentally hooked the mouse. To avoid the emergence of such situations, the equipment capable of influencing the computer out of sleep mode must be configured accordingly.

It is best to make such a setting through the "Device Manager", where on the Power Management tab, you need to activate the computer output bar from the sleep mode.

Hibernation management

Finally, let's look at the setting of sleep mode from the point of view of the need to use hibernation. Its in some cases is just recommended to replace the usual sleep, which is especially relevant for computer systems with small volumes of hard drives. The hibernation file that occupies a lot of space in the Delete manual system section manually (no you can help any access rights at the administrator level, nor the unlock program). You can get rid of it in only one way, which consists in full disabling hibernation. Make it through command line, caused on behalf of the admin, by performing a combination of PowerCFG -H OFF. When rebooting the file will be removed automatically.

Possible problems associated with set parameters

It remains to say a few words about possible problems that may arise after installing certain options for sleeping mode. Very often it is recommended to immediately deactivate quick start, if possible, do not use passwords, do not install shutdown hard disk or USB ports, etc. Very often, such actions are used as additional solutions even when eliminating some failures in the installed equipment. Among other things, you can change the settings of sleep or hibernation through the registry or group policies if they are inaccessible for the selected scheme, but the methods above are the most simple methods for an ordinary user.

Updated - 2017-01-25

In some of the articles, I already mentioned that how to set up sleep modeBut I began to do questions about how to do it in Windows 7. Therefore, I decided to devote a separate public. It is good that you ask questions. I, at least, know that you are interested in most. IN Windows XP. All settings of the sleep mode are in the same window. Properties: screen. I wrote about this in the article,

Why do you need sleep mode? Previously, when monitors were electronically beam, the sleeping mode was used to not fill the phosphor. This substance was covered with monitors screens for converting energy absorbed into light radiation.

From a long and permanent work, the phosphor burned out, and the colors became dull and blurred. Moreover, this radiation was very harmful. That is why it was necessary to disconnect the monitor during the break time in the work or display a screensaver that prevents the rapid burnout of the phosphor.

The second plus of the sleeping regime was that you can move away from your computer at the time and not to be afraid that someone by negligence or intentionally spoil your files.

To do this, it is enough to customize the time through which your computer, if you do not work for it, will automatically go into sleep mode. And you can exit sleeping mode or simply moving the mouse, or by the password that you installed on the login.

Unfortunately, I now do not have a computer with an operating room windows system XP, so I will give you a description , without screenshots. But under this description there will be my video on this topic, which I mounted earlier when I had Windows XP.

How to configure sleep mode in Windows XP

1. Right-click on the free of labels and files of your place Desktop
2. In the drop-down menu, select the last item Properties
3. In the window that opens Properties: screen Click the tab Screensaver
4. Go to the second half of the window and click Food
5. In a new window, open a list in the windows on a small black elderhead opposite each record and set the time interval through which you want to have a disconnected monitor, hard disk or the sleep mode.

Video - How to configure sleep mode in Windows XP:

How to configure sleep mode in Windows 7

In Windows 7, the sleep mode is configured a little differently. More precisely, the settings themselves are completely different, and immediately you just do not find them.

In order to get to them, you need to open the menu Start - Control Panel.

In the next window in the window Search (in the upper right corner) dial the phrase " Sleep mode ». You will have links Power Supply, I. Password request when leaving sleeping mode.

Click on the back Setting the transition to sleep mode.

In a new window, adjust the time through which you will turn off the display or the computer will switch to sleep mode. To do this, click on the small black triangle to the right of the function name.

Especially pay attention to the function Require the introduction of a password when awakening. If you set the value - Yes, After you move the mouse or press any keyboard key, you have a window with a request for the password.

The password will be the same as when entering the operating system.

Also, the exit from the sleeping mode according to the password can be set out of the window Power Supply.

In a new window, you have the ability to configure the computer buttons on the front panel. What value you install, they will perform such an action when you click on them.

In order for you to leave the sleeping password mode, set the write switch Password.

Do not forget to keep all your changes! Otherwise, your settings will be reset, and you will think that your system does not work properly.

Video - How to configure sleep mode in Windows 7:

Now you know how to set up sleep mode. I hope that they will not cause you difficulties.