Wood Banzai from Bead Scheme. Different variants of plentine from the bonsai tree beads in the master class. Materials and machinery

In one of our articles, we told. However, if you want to start such an evergreen plant in your home, but you don't have time to care for him, there is an alternative - a bonsai tree from beads. This magnificent decoration does not require attention and daily remains invariably beautiful, glad the eye of the game of light on miniature beads. To create such beauty, you need a lot of hardness and perfection, but our instructions step by step will explain how to make bonsai from beads with your own hands, so you will certainly succe.

Bonsai semi-scolded beads

This master class with step by step leadership For novice needlers, it will help to make a small sized tree, which will become an original beautiful addition to the interior. Especially organically it will look in Japanese style.

For work you will need:

• Small green beads (200 g);
• Scissors and nippers;
• PVA glue;
• Alabaster;
• Green wire 0.3 mm thick (2 coils 50 m);
• Colorless varnish and brush for him;
• Acrylic paints or gouache with a tassel;
• Stand (clay pallet from a flower pot);
• Wire thick (for trunk).

Phased scheme of action with photo:

• We start working with the manufacture of sprigs. We cut a wire of 0.3 mm per 360 segments of 25-26 cm. We ride for each segment of 10-11 beerts, retreat from the end of the wire 5 cm, we make an oblong loop and twist in 3-4 turns;
• It turns out the design where each leafle is located on the leg, all the leaves are closely arranged to each other and almost there are almost no gaps between them. Each twig should have 5 leaves;
• We twist both ends of the wire. At the same time it turns out a branch with a bud of leaves. There should be 360 \u200b\u200bpieces of them;

• Next, we make twists from three branches and wind by their pieces of threads moistened in a solution of glue and water, as shown in the photo. In the same way, we combine the resulting large branches. The final stage is another union of the resulting products of the thicker wire;

• In parallel, start doing the trunk. Based on its sizes, we finish the required number of twigs. We take a thick wire 40 cm long (for this you can use a three-core aluminum wiring, separating it into three parts). The products made in the previous step are typing each part. Already begins to draw the design of the tree (see the image below);

• Wrap a wire barrel with a special bandage with a plaster that can be bought at the pharmacy. It needs to be cut into a strip in a centimeter wide, hold in water for a minute to cut the plaster. After that, the stem side is winding, ranging from the top and moving to the base. You can also apply an ordinary bandage, but then the fixation will be less durable.

How to fix bonsai from beads:

• As a stand, we will use the pallet from clay with a diameter of 10 cm;
• In a separate container, we divor the alabaster with water to the consistency of medium density. Fill in the resulting mass of the pallet, immersing the "roots" in it, smoothed the mixture so that the parts of the tree are not sticking out. Hold the design until the solution is captured;
• Next, we apply alabaster composition on the branches and the trunk, the leaves do not hurt. We are waiting for a complete drying of 3-4 hours. If there are spaces, we will go on a solution again and let's give a completely dry. The mixture can be slightly stroke, so it is necessary to slightly "pull up" up with the help of a brush;
• Give the trunk realism. To do this, make relief and imitation of the bark using a rigid brush. To create grooves, we make small holes with toothpicks. If the relief turned out to be too deep, you can slightly correct it with its sandpaper;
• On the wire at the bottom we apply a mixture, forming roots.

Praying in the tree:

• Sverhead and branches stain in light brown and let dry. To do this, mix brown and white paint on the palette until the required shade is achieved;
• Next, you need to create a shading, making a barrel a little darker. To do this, we will divorce the brown light okhru and applied to her strokes. Optionally, you can choose any shade - darker or, on the contrary, brighter. You need to do everything carefully, so as not to hurt a bead crown. If this happened, it is necessary to wait for drying and only then to extract pollution;
• Leave bonsai to dry for 5 hours, then cover with matte or transparent varnish. We wait for complete drying.

We decorate the clearing:

• The final barcode is the decoration of the cleaner next to the christmas tree or moss. You can also use small pebbles for decorating, but they need to be covered with a varnish.

On this, the creation of a bonsai is completed. It turns out a tree that looks no worse than living.

Blooming pink bonsai

Collect bonsai from beads - severe painstaking work, but the effect of this bright interior beauty is simply amazing.

You will need:

• Threads of any color to wind the trunk;
• Beads orange, pink (or white), green;
• Wire - 0.4 mm, 3 mm and 1 mm;
• Brush;
• Alabaster;
• Construction Scotch;
• PVA glue;
• Paints.

Step-by-step instruction:

• Making flowers. To do this, the wire is 1 mm dial white beads (we do not tear off from the meals). From the edge, we will retreat 8-10 cm and make out of 10 beads of the loop. We do next to the second loop, and then the third, fourth and fifth;
• How to make a middle. You can take a wire fond (0.4 mm). We will retreat from the edge of 8-10 cm, we will make out of 6 bispers 3 loops. Insert the middle in white (or pink) flower and spin;

• Then we will produce the "cup" of the green color of 6 loops of 10 beads, insert the flower into it, tighten. Such floweries should turn out 66 pieces;

• Connect them into the beams of three pieces, wrap using a thread. There will be 22 beams;

• How to make a tree. Two beams connect, wrap the thread. A little lower, we will take another bundle and wire in 3 mm;
• Next, take another two bundle. It turns out the top of the tree;
• Combine separately three beams and wire 1 mm to get a branch that we will take the top;

• We will begin to make a branch of four bundles (we need 2 such branches). We take them in turn to the trunk;
• The last twig is made of 6 beams, then primed to the trunk. To simulate a broken branch, we will take a wire in 1 mm to the trunk. We wrap with the help of the construction tape the future bitterness to threaten the trunk;

• "Put" in alabaster to frozen, and then the trunk of PVA and Alabastra. Let it dry well;
• Then paint and cover lacquer.

It turns out a beautiful blooming bonsai of beads, which every day will surprise you with your unusual graceful view.

Beading is a rather laborious process, but also very exciting. As a result, unique interesting decorations are obtained, which you can decorate your own home or give them native and relatives. Such man-made trees will not leave indifferent even far from a man's handicraft.

The video lesson submitted below will help see the process of creating a bonsai of beads more clearly.

Videos: Bonsai beads in Yin-Yang style do it yourself

Would you like to have a beautiful evergreen bonsai in your house, but do not know how to care for this tree? Then our bonsai from the bead is exactly what you need! Prepared by our needlewomen master class with step by step photos It will help you create a magnificent decoration for the interior with your own hands. In this master class, we will tell you in detail how to make bonsai from the beads with your own hands.

Tools and materials Time: 72 hours Difficulty: 4/10

• green beads (small 200 grams);
• green wire 0.3 mm (2 reels 50 meters);
• pVA glue;
• alabaster;
• nippers and scissors;
• fat wire for the trunk;
• stand for a bonsai (clay pallet);
• tassel 2 pcs. (one for the painting of the trunk, the second to open the tree lacquer);
• varnish colorless;
• paints (gouache or acrylic).

Bonsai tree can have such forms: vertical, curved, leaning, cascading, semi-table, trunk in the wind, split trunk, feather-shaped, grove, bancon, soot. In this master class, step-by-step photos we will tell you how to make bonsai from the beads of a half-row form.

This church has a small size and can become a beautiful desktop decoration for the interior not only in Japanese style.

Step-by-step master class

Making bonsai from beads is not at all difficult, but the work is painstaking, so basking with patience!

Step 1: We make branches with leaves

We begin to make our tree from the twigs. To do this, cut a wire 0.3 mm to 25-26 cm, we will need 360 pieces of segments. We ride 10-11 bispers (in this case, a Chinese transparent green beads are used). From the end of the wire, we retreat 5 cm, we make the loop of the oblong shape and twist (3-4 turns), each leaf is obtained on the leg, the distance between the leaves is practically no, i.e. They are all very close to each other. In total, there should be 5 leaflets on the branch, then twist two end of the wire and we have a twig with a bead leaf bundle.

So, we had only 360 twigs on each of the five twisted bead leaves as shown in the photo.

Step 2: Collect the branches in larger

We collect from the twigs that we prepared in larger branches, first twigs twist among themselves.

Watch up with a thread or thin yarn, I have a thin yarn (I don't remember that it dissolves), wet the pieces in a solution of water and glue and wind up our billets.

Connect large branches with each other.

Then these twigs will adapt to a thicker wire. As a result, we obtain these large branches as in the photo.

In parallel, we do the trunk, we need to see what the size of the tree is and how much we need twigs.

For the trunk, we will need a thick wire with a length of 39 cm. The cooked branches are typing to the trunk, thereby form a tree. The wire for the trunk was purchased in the construction store (electrical wiring on an aluminum-based aluminum-based) I divided the three veins and we already turned out three branches to which we also adhere to our billets.

We tying the prepared branches to the trunk.

The main branches turned out 5 pieces, and small twigs already go from them. Here are all the twigs to the trunk, shown in the photo.

The trunk is wrapped with a gypsum bandage (you can buy in a pharmacy if there is no such, it is possible to wind up just a bandage), sliced \u200b\u200bstrips of 1 cm wide To the base.

Step 3: Fix bonsai from beads

When all the branches were taken to the tree, prepared the trunk, everything suits us, begin to plant a tree.
The tree will be planted into the clay pallet, the diameter is 10 cm (they are usually sold with a pot, the pot without affairs will not remain either, it can be planted, for example: flowers, a tree). We take the container, weighing an alabaster with water in it, the mass should turn out to be medium density.
We smear into the pallet with the resulting mixture and insert the tree, we can weigh the mixture, where the "roots of the tree" can be seen. Tree is not thrown, but keep until our solution starts to stick.

Step 4: Make the trunk

I advise you to apply a mixture into two starts, the first time was inflicted, we wait until it dry 3-4 hours, and we look at the second time, where there are missed places on the branches and apply the mixture to these places. Again we wait until he dried, I usually leave for the night, the next day, you can work further.

The solution can stroke a little, we correct it, as if tightening the tassel, let's breathe a little and begin to make a little embossed trunk, so that there is a real imitation. The imitation of the bark is done with the help of a tight bruster (brush for glue, and then we will open the tree with this tassel), we make grooves, you can also use a dental wand or sharp.

In this case, we needed the trunk was smoother, I don't do deep grooves, but slightly. If the relief of the barrel turned out to be strongly deep sandpaper, you can fix everything.

Making roots. To do this, we apply a solution with a wire and give it the shape of the roots. If the thickness of the tree is not enough after applying the first layer of the solution, then it is necessary to give it a dry and apply another layer. Pay attention - at the top of the branch should be thinner than the trunk itself.

Step 5: Prayer Stem

For painting, we take paint, you can gouache or acrylic. In this case, acrylic are used.
The basis of the trunk is made of light brown. For it we break brown paint with white to the shade you need. After the paint dry, the barrel is sideway, making it a little darker in places. To this end, we will drag the brown paint with the tone of "protection of light" and smear the barrel. You can make a trunk lighter or darker, here as you will already be used.
It may be such that bead leaves are blocked with a solution, paint. It is best to clean them when everything is driving, but try not to dump - it is not very convenient to extort.

Traditional Japanese art bonsai firmly entered world culture. The cultivation of trees in miniature is troublesome and requires incredible time costs. Sometimes to grow a miniature tree, gardeners spend more than a dozen years, and care for the created dwarf is so complicated that it is better to leave it professionals. We suggest you bypass a large number of difficulties and pamper yourself with a bonsai bonsai tree, step-by-step instruction It will help you in creating miniatures.

Useful tree

According to an ancient Japanese legend, one of the emperors commanded his subject to create a miniature copy of the state. To accurately reproduce urban streets on the layout, dwarf trees were invented. The advantage of a beaded bonce is hard to overestimate:

• beauty;
• lack of care requirements;
• the ability to create almost any instance in a short time;
• a wide selection of forms, sizes and ways of design;
• the ability to admire the miniature year-round (the real bonsai takes place for the winter period of rest and loses its decorativeness);
• the composition of the composition is suitable even for beginner masters;
• the ability to realize your plans, for example, make a flowering tree.

Caring for such a composition will be minimal, you just need to wipe dust from time to time. But you can admire it year-round and will fit the bead tree to any interior.

From the history of bead

Modern craftswomen can create miniatures from various materials such as natural origin and synthetic, but most often the choice stops on the bead. Why? The answer is very simple - tiny beads are able to undergo a test of time and not lose their decorativeness. This is evidenced by archaeological excavations.

Beads was invented by the ancient Egyptian masters. They were the first to revealed the secretion of glass manufacturing and created small beads. From the modern material, the ancestor was distinguished by turbidity, an uneven surface, dull paints. Nevertheless, the green bead detected by the Egyptologists did not lose its type, although according to the calculations of scientists for more than 5.5 thousand years! It was the Egyptians that contributed to the creation of crafts and the development of beadwork as an independent type of creativity. They invented the technique of mesh nose, allowed to make crafts without the foundation.

Modern material is produced throughout, but the main centers specializing in the manufacture of high-quality glass is Czech Bohemia, Italy and Japan. Buying beads of these manufacturers, you may not doubt his quality. The Japanese not only mastered the creation of glass beads, but also beat their shape. It can be both simple or corrugated and have complex geometric shapes - cubic, capped, triangular, curved (IATIA).

Choosing the material, know that its number is the greater, the smaller the bead itself. And so that the work was neat, the tool should be seamless in accordance with the number.

Materials and machinery

For registration of thumbnails you will need:

• beads of several shades of green;
• wire suitable size;
• segment of a durable wire for the trunk;
• floral tape;
• nippers;
• gypsum (Alabaster);
• glue "Moment Crystal";
• pVA glue;
• acrylic paints or gouache;
• decor (pebbles, small figures);
• tank capacity (optional).

There are many techniques for the manufacture of bead crafts, but for a bonce of needlewomen choose looping weaving. It is characterized by simplicity and speed.

The technique is to create a loopset on the segment of the wire. Work is performed on the following weaving scheme:

On the segment of the wire 40 cm long, 8 beads. Align the first and last and twist the ends under them in several revolutions. A neat loop is formed.

Boning Bonsai

Create your own hands bonsai from the bead will help you detailed instructions With step-by-step photo. Before performing the work, pick up a suitable sketch or draw it yourself. Take a look, which variety of forms offers traditional Japanese art:

Deciding with the style of miniatures, you can start work. First form sprigs according to the scheme described above. On the beaded wire, form a loop of 8 beads. Their number may be arbitrary, it depends solely on your imagination. Place the beads on the free end again and form the next loop. In total, 8 green hoppers should turn out on top of the branch. Wire ends twist and reduce up to 10 cm long with bodies.

To create a bonsai need at least 150 such twigs. Form the larger branches from them by connecting the bundles of three pieces. Make branches in accordance with the selected sketch.

After connecting the wire segments, wrap the surface with a floristic ribbon or yarn. You must have several large branches that should be closed to a trunk from a thick wire.

On this, the creation of miniatures does not end at all.

Assembly and decoration

Now you need to roam the bonsai and add it to the decor. This will help you with a small master class with a photo.

For landing, you can use both the traditional low rectangular pot, and create a small island from alabaster.

To make an island, select the tank of the appropriate size and check it with the bottom of the polyethylene sachet. Divide the alabaster, place the base of the tree in the pot or shape and fill with the solution. Stick Bonsai until the gypsum grabs. Remove the thumbnail from the form.

Now it's time to do the trunk. To do this, mix the alabaster with PVA glue and apply Cashitz on the barrel and branches. With the help of a wooden spit, make a bark by making small recesses.

Leave the barrel to complete drying. As a result, it should acquire this kind:

Use the gouache or acrylic paint for painting the trunk. Apply darker tones in "cracks", and from above more light tint. Come on a slightly moistened cloth on the surface, as if erasing paint. Paint the island to the desired shade, complete the decor and cover with varnish. He will not only give durability and facilitates the care of miniature, but also make paints come down and sue.

Bonsai beads ready! It will organically fit into the interior of your dwelling, adding to him notch of refinement and delight, and may also become great gift For a loved one.

You can see ideas for design below:

Video on the topic

To familiarize yourself with the nuances of the manufacture of a beaded bonsai to help you will be helped by video lessons provided in this section of articles.

Bonsai bonsai tree - real works of art

Products made of multi-colored sparkling beads elegant, sophisticated, admire fragile beauty. For a creative person, there are no borders in the world of needlework, he tirelessly fountains original ideas, creating amazing crafts skillful hands.

The art of beadwork has long been known, people for many centuries successfully make earrings and bracelets, beads and hair accessories. Bonsai is a separate direction of beadwork, the essence of which is in the ability to create luxurious trees from small beads.

Such decorations will become a symbolic gift to friends, close and all connoisseurs of unique artwork of needlework. Having learned to weave the trees from beads according to weaving schemes, you will have a unique opportunity to create fantastic designer decorations to in the house round year Spring reigned.

You can rush in the style of bonsai with your own hands not only Sakura, as many think. Skillful needlewomen create truly delightful works, from miniature colors for a keychain, to beautiful trees with a height of more than one meter. Getting Started with a fascinating, but time-consuming process of creating an exclusive craft from beads, it is important to familiarize yourself with the basic rules of ancient applied art.

Materials and tools

To learn how to make crafts from beads for beginners, experienced wizards of beadwork recommend:

• Use schemes. With any needlework, you should first get acquainted, and after that it starts to work. In beading, newcomers will help a visual instruction, in which each individual step of the creative process is described in detail.

Creating a tree of beads

• Properly pick up materials. Quality and aesthetics of crafts Depends on properly selected materials. Selecting the glass, beads or beads for sparkling crown, give preference to proven manufacturers.

Weaving from beads on the example of the finished circuit - the process is painstaking, but interesting. Remember that even the miniature tree is made from a variety of small elements.

From a variety of beads, his colors and size beads depends on how the ready-made tree looks.

• Correct the frame. To bonsai be fadedly curved, elegant, but stable, correctly select the wire. It should be thin like a fishing line, but strong enough to ensure that the design is stable.

Phased tree creation

There are several ways to create bonsai beads according to a weaving scheme: nipsy, weaving arcs or French, parallel or dense. Newcomers can be enjoyed different options using the master class of experienced masters, determining their own way, most understandable and convenient in work.

Weaving lessons

In a huge variety of ideas, a tender Sakura, fragile birch or bright autumn rowan remains the most popular today. You can safely use ready-made weaving schemes or create something unusual yourself. The amazing art of weaving trees is a great way to organize a small home business.

Bonsai tree number 1

Bonsai tree number 2

The luxury flower garden is able to add the interior of the living room or bedroom, add notes of elegance and emphasize the shared taste of the owners. Want to amaze and admire guests, demonstrating a filigree ability to create an exclusive bonsai? Then boldly immerse yourself in peace, full of creativity, create trees and bead flowers.

Weep birch

The miniature fragile birch will become a symbolic gift to the true connoisseur of Russian nature. To work, you will need a strong meter, but thin wire, green beads, threads in tone for winding, PVA glue, alabaster.

Choosing beads for foliage, you need to pick up several consonant shades. So the tree looks brighter, more realistic, more volumetric.

This will get a wonderful bead tree.

Work description:

• From the Moke of a thin wire cut off a rod with a length of 40 centimeters, the end is spinning into the loop. We ride the beads in any order by winding 9 cavity on one segment, the distance from each other into one centimeter. After that we fold in half so that one loop remains in the center, and others are twisted with each other.
• Similarly, we ride all the large 15 twigs, and another 57 elements we are in the same way, but by 11 loops.
• We make branches. Small twigs will go for the top of the tree, and are larger - evenly on the tree. You need to form only five large branches, three thin in each of them. We choose those that longer, take them to the wire to the bottom. Moving to the top of the village, we tying all the smallest twigs.

Formation of crown for birch

• Form the crown of birch. The algorithm is simple: we make two tops separately. The first consists of three twigs, and the second is from two elements. Alternately, it will take 12 and 7 long branches, respectively. Connecting elements together, watches the big peak to be a couple of centimeters above.
• Tightly combine all the details, wrap my scotch, leaving the ends of the trunk and flexing the wire in different sideslike roots.
• From alabaster, diluted with water, form a stand, insert the craft into it, leave it to dry.
• To make the tree more like a birch, make the famous "striped" trunk. For this, it is stuffed, covering white paint, and on top of the strokes we apply a stains of black.

Finishing strokes - make the famous "striped" trunk

The basis is decorating to your taste. You can simply paint acrylic green paint. To have a caretaker natural View, It is possible to glue the base of moss in the form of a thick clearing. Stylish, elegant and sophisticated accessory ready. Present his friends-foreigners or business partners in memory of your acquaintance.

Magic Bonsai "Inynan"

An ancient sign Inian is the most famous symbol Ancient China. In Taoist philosophy, it is said that he denotes the unity of opposites, for example, black and white, men and women, the sun and the moon.

It is a bright and unusual decoration, symbolizing the male and women's start, can be a real talisman

Beautiful and symbolic bonsai yin Yan from beads is a delightful wedding gift with philosophical subtext, which will bring good luck and family happiness to the newlyweds, at the right time remind of mutual understanding and patience.

To make the Yin Yan tree, you will need a beads of two contrasting colors, the perfect gamma is black and white. The handicraft consists of two separate elements, closely twisted with each other in unity.

Let's start working:

• Cut a thin wire for 60 segments, the length of each at least 45 centimeters. According to the weaving scheme, we ride a nine beads of one color on the loop and twist the wire. On one segment it is necessary to associate only seven identical loops and fold it in a twig.
• Of the three elements we make one twig, for only one tree, 10 blanks will be required. The branch is wrapped in foliage threads. We connect the elements tightly spilled in the barrel, the tree is obtained.
• Similarly, we make a tree of another color, beautifully intertwine their trunks. In the prepared stand, we fill the gypsum mixture, we insert the crawl, give the design to frozen.

So that Bonsai had a neat and festive look, we spread beautifully leaflets on trees, decorate the clearing under it beads, coins, or beads in the tone, forming a famous round symbol of Inyan.

Bonsai tree "Inynan"

Want to give people happiness and joy? Learn to weave the luxurious bonsai gardens with their own hands filled with sparkling flowers and bright pleate trees from beads, personifying the amazing nature of nature, reflecting favorite time of the year. To master more complex techniques, you can use ready-made master classes and video lessons.

Surely many have seen bizarre little trees in pots. These trees are grown, thanks to the art of bonsai - the art of creating absolute copies of plants in a reduced form. It is worth such a tree that is not cheap, but it can be created and yourself. In this article, we will tell how to make a tree from Bead: our master class will suit those who are just beginning to master the art of beading.

Beaded bonsai: master class

In order to escape the bonsai tree from beads with their own hands, you need to stockday and patience.

Materials for manufacture:

• Green beads number 10 (best mix different shades of green)
• Wire - 0.3 mm, 1 mm, 3mm.
• Thicks
• Colorless glue, for example, superclauses, moment.
• Alebaster or Gypsum
• Elements for decor (pebbles, beads, stones)

Step-by-step instruction of the bonsai tree

So let's start.

Production and formation of branches:

We take thin wire (0.3mm). Its length should be about 45 cm. 8 bisper is put on it. The loop is formed and twisted for two turns. On the other end, 8 beads are also recruited and loops are made. Immediately you need to twist 2 more loops. As a result, 8 kettops on the wire should turn out. To understand how to make bonsai beads. Weaving scheme Next:

Both tips are twisted - a bud. The length of the ends should be no more than 10 cm. Therefore, unnecessary is cut off. These boot wood needs to be made in the amount of 150 pieces.

We take three buds and make 1 big bundle of them. Thus, we get 50 large beams.

We begin to form branches. So that we have the top of the tree need to make two branches. They are formed with the help of beams - you need to combine 3 beams and clean the thread of 2 cm. - It will be the base of the branch.

Two more join the bundles, so that two branches come out. They are also wrapped with threads and join the main branch from the side slightly lower. As a result, such a branch should turn out, as in the photo:

With the help of threads, the base is winding, we attach three more branches made from 2 beams each. As a result, there will be four branches on the branch. This is the second batch branch.

We make the third batch of branches - as well as the second, only one bunch is added, so that 5 branches are obtained. They can be placed in their taste.

Tree formation:

All twigs needed to form wood are prepared and now, they must be combined

First, branches from the first batch are combined, they are screwed to the wire (3 mm)

The remaining tip of the wire is bent

Making the base for the bonsai

To create the basis, it is necessary to take a form (any container)

To be more convenient, the form is covered with polyethylene

The diluted alabaster shape is poured, after which a tree is put in it. Alebaster must dry.

The barrel and branches are deprived of alabaster and glue solution.

With the help of matches or toothpicks on the trunk, grooves are designated (future view of the crust).

Once the base freezes it needs to be put out of the form (for polyethylene)

Only decor remains. On the basis of the tree you can stick pebbles, artificial grass and much more on the taste of the wizard:

We offer you to watch video lessons for the manufacture of bonsai bonsai tree. In them you will see that there is not one version of the weaving of this tree.

Our article told you what weaving from Bead Bonsai: MK, Schemes, Videos - this is what we were pleased to offer you. We hope that this lesson will allow you to create something beautiful and unfading and in your home! Pleasant needlework!