Sew a skirt for a girl for ballroom dancing. Skirt-sun with an elastic band for dancing. How To Sew A Workout Skirt For Latin And Standard

All dancers understand how important the right clothes for dancing. It should be comfortable, free, not hindering movement. All these functions are embodied in the skirt. It allows you to move smoothly and feel relaxed not only on the floor in front of the audience, but also in the rehearsal room.

How to sew a skirt for oriental dance

Oriental dances attract not only with their sexuality, but also with their bewitching costumes. If not for the chic feminine skirt, oriental dances would not have looked so exciting.

In order for oriental dances, you need to buy a thin fabric. Most often it is silk or chiffon. The fabric should look expensive, but not too vulgar, so it's best to avoid colorful prints.

Many people use the style.
The pattern is transferred to the fabric. The following details are obtained: the front and back panels, the belt (when cutting it out, add about 3 centimeters of length for the fastener).
First, the side cuts of both the front and rear panels are grinded.
On the left seam, be sure to leave an unstitched place in order for the zipper to fit there. It is necessary to iron out the seam allowances.

After all this, a zipper is sewn in.
The belt is reinforced with interlining and sewn to the skirt.
The skirt needs to be left for a couple of days so that it "sags".
At the end, all seams and cuts are processed. Most often, a ribbon is sewn onto the bottom of the skirt.

How to sew a ballroom dance skirt

It should be remembered that each style of dance provides for different styles of skirts. Usually, layered skirts are sewn by the sun. Petticoats should be sheer and lightweight fabrics.

Patterns are best done on graph paper and only by individual measurements. The pattern is transferred first to the lower layers, then to the intermediate ones (tulle), and at the end to the upper skirt (satin).

After that, blanks are cut from the fabric.

All skirts are overlaid and sewn to the bottom.

This product must be hung for several days for the fabric to stretch.
The bottom edge can be trimmed with a thin satin ribbon, and a flower can be sewn on the side. Remember, you need to sew the skirt in such a way that it is comfortable in it and the girl can easily make even the most abrupt movements.

How to quickly sew an elegant and simple dance skirt

There is a very simple way to sew an elegant dance skirt. For this, soft organza is often used.

First you need to sew the edges of the elastic, only so that the seam does not protrude much. Then we proceed to the organza itself.

The width can be arbitrary, but the length should be 2 times larger than planned (for example, if you need a skirt of 20 cm, take 40 cm of fabric).
The skirt is joined at the side seam. Measure in the middle of the length and sew with a very large seam at this location.
You need to tighten the seams to make nice folds. When the skirt is pulled together, its width should be leveled by the elastic.
To evenly sew the elastic to the skirt, you need to secure it with pins and sew. At the end, lower the hem. This will make a wonderful dance skirt.

How to sew a tutu skirt: video

A dancer knows firsthand that bright and comfortable clothes are needed for a good performance. To do this, you need to understand concepts such as dance skirts and their features. It doesn't matter what style a person is fond of: oriental dances, latina, ballroom - everyone will need such clothes.

Peculiarities

There is a separate and special world of fashion on the floor. It may seem to some that there is nothing difficult in choosing a dress, because almost all costumes are similar to each other. But this is far from the case. Over time, dance has become a real art in which people follow certain rules not only in the technique of movements, but also in choosing a costume.

Today, choosing a skirt for a dance requires a lot of effort. Fashion is changing not only on the world catwalk, but also on the floor. When choosing, you must take into account the length, silhouette, color design of the outfit. The number of decorative stones and rhinestones on the costume is of no small importance. All these features need to be known.

Views

There are several basic types of skirts that are suitable for certain styles of dance. The differences between all the options are in the length, shape and material used for sewing.

Clothes for oriental dances are presented in several versions. Focusing on the features of the girl's figure, you can choose the right model. The sun skirt is suitable for slender girls, as during the dance the outfit looks quite bright and attractive. For owners of curvaceous forms, the look of a fish will be the ideal solution. The skirt emphasizes movement during belly dancing.

European dance styles require long and chic outfits, complete with lots of details. In the kit, the girl should feel lightness, so no heavy materials are used for sewing. In Indian styles, exterior design plays an important role.

Training room

The training options are different from the performance models. Skirts are simpler and shorter, elastic materials are used for sewing. Clothing allows you to perform various movements without creating discomfort during the dance.

Drawstring

These options are great for choreography that requires stretching or other physical activity. The advantage of skirts is their lightness during movement. Basically, the thing with the ties on the side is used for Latin and ballroom dancing.

For belly dancing

These models were mentioned above, but now you need to familiarize yourself with the features of each. The main types are:

skirt sun. It is long and lightweight fabrics are used for sewing;
straight skirt. Suitable for owners of curvy shapes, it is advisable to choose options with a high cut.

These models are used specifically for belly dancing, as the movements should look graceful, convey the beauty and femininity of the girl. Thanks to them, you can achieve the desired effect.

Spanish

Considering the fiery rhythm, it is necessary to "obey" certain rules in the dance. Clothes should not create discomfort, the girl needs to move freely. Basically, the skirts are long, bright, and become wider towards the bottom. Seductive cuts and ruffles also make a difference.

For standard

In this case, the simplest options are used, which allow the girl to perform even complex movements. Models can be used as outfits for performances in different dance styles. The length of the skirts may vary, it all depends on the rhythm and complexity of the movements. More often than not, this is not too much. short models, knee-length.

Gypsy

The brightness and splendor of the gypsy-looking skirts is simply amazing, and attracts the attention of the viewer in the first minute of the dance. Clothes are always distinguished by rich colors, various decorations. Sometimes skirts are made up of several layers, not always of the same color.

Classic

Such models are not designed for too rhythmic movements, but rather for smooth and accurate movements. The main thing is comfort and convenience during the dance, therefore, when choosing, the main emphasis is on these qualities. The design is not very bright, the models look restrained, but attractive.

With smell

These models are used for incendiary dances, mostly with a fast pace. A good option for performing a Latin American style, where the legs must move freely and move from side to side.

Fish Skirt

The clothes are used for belly dancing. It is worth noting that today this option has become widespread in many forms, so there is a different design and sewing of the outfit. Basically, bright material and stones are used to create. This creates a nice and win-win effect while dancing.

I welcome all blog site readers. We will continue to replenish the section of the pattern of skirts, and all the styles, and today I got to the pattern of a skirt for dancing. Here I will show you five patterns for dancing skirts.

Here is the simplest pattern: in fact, just a rectangle of fabric, in the style of a scarf, which is pinned on the hips with a decorative pin or brooch, decorate the edges with braid or fringe.

The next pattern of a skirt for dancing: with an asymmetrical bottom line, which is suitable for daring girls. This is a very short skirt, which is best sewn from leather or suede, and the bottom is trimmed with a fringed braid to match the material from which the skirt itself is sewn.

Another pattern for a skirt for dancing: take a triangle with a base that is equal to the volume of the hips plus eight centimeters for the tie. The height of the triangle is approximately 10 cm. From the top we set aside 30 cm, and then another 40 cm. From each of the new points lay straight lines, as in the figure. Sew a fringed braid between the layers and below.

We take a measure of the circumference of our waist, build a semicircle, on top - a tie, we process the edges either with a hem or a zigzag.

Stay tuned for site updates, subscribe to the newsletter, and good luck to you, bye everyone !!

Ballroom dance outfits are rightfully considered to be the most beautiful. They are graceful and effective at the same time. In this article, we'll take a look at Latin dance skirts. The elastic materials from which these skirts are made do not hinder movement, providing maximum comfort. For many of them, there is no strict dress code, but certain nuances still need to be taken into account when choosing. The most rational solution would be to sew a Latin skirt with your own hands. Moreover, the pattern of a Latin dance skirt is quite simple, their sewing does not require a lot of experience as a seamstress.

Since Latin American dances contain a lot of improvisational moments, the skirt should not hinder movement. On the contrary, its cut should provide freedom and convenience.

Latina should not be sewn too short or too long. Also, do not sew an overly narrow skirt.

The latin skirt is characterized by side slits, flounced trims and an asymmetrical hem. Dance movements are emphasized by the lightness and softness of the fabric, the top fits the figure.

Another point that requires mandatory attention - the skirt should not be too frank, compromising the girl. During the dance, the outfit is obliged to bare only what is supposed and not more. The correct cut should emphasize a beautiful silhouette, movement, be the key to a comfortable dance feeling.

And, of course, you and your partner should like the dance outfit. You need to feel confident, sexy, attractive.

Types of skirts for Latin

Fringe

Such dresses and skirts are made short, completely embroidered with a long fringe.

With any turns in the dance, the fringe moves, emphasizing your movements, making them more effective. The range of motion increases due to the oscillation of the fringe. If you want this effect, then the model is right for you.

The disadvantage of this choice is a rather time-consuming sewing process.

Shuttlecocks

Skirts with flounces emphasize femininity and sensuality. Rows of shuttlecocks start at the hips. Like fringes, shuttlecocks increase the range of motion of the body. Such models are recommended to choose girls with slender knees. If there is excessive fullness of the legs to the middle of the thigh - it's okay, the shuttlecocks will hide it. For very thin girls, outfits with flounces should not be sewn, they will only emphasize thinness.

Skirts with flounces are usually sewn from satin or silk, which shimmer beautifully when the lighting changes.

Island style

The skirt is made with a fit on the hips. It can be with a smell, from rags, with flounces.

This cut requires a perfect tummy condition. Skirts are sewn short, with round cut lines. Even for slender girls, such models are acceptable, they will make the figure very feminine.

Asymmetrical hem

A safe bet if you need to hide the top of your legs. The execution option can be very different - at your request.

Retro

This skirt is sewn for jive. This dance to the good old rock 'n' roll requires a retro outfit. We sew a fluffy skirt knee-length. We choose bright fabrics, the material in peas looks great in this version.

How to make patterns for a Latin dance skirt

Having decided on the style of the skirt, you can start making patterns with your own hands.

It can be based on a straight skirt pattern. The photo below shows an example of such a simulation.

We measure the desired length on the pattern, draw the bottom line at an angle. We decorate the skirt with fringe. Determine the number of tiers of fringe on the skirt as you wish.

To cut an asymmetrical skirt, measure the waist circumference. This measurement will determine the diameter of the skirt pattern. We process the upper edge with a stitching that turns into strings. We wrap the bottom, tuck and sew.

To cut a spectacular shuttlecock, use the pattern in the photo below.

Determine the length of the flounce stitching line by measuring the length of the lower cut of the skirt. We mark the lines of the cuts on the shuttlecock, cut and move the piece apart by the required size. We draw the bottom edge of the shuttlecock with a smooth line.

Another variant of the asymmetrical cut is shown in the following drawing. Such a skirt can be performed both with a fit at the waist and with a fit on the hips. In the first case, to determine the smaller radius, we use the OT measurement, in the second - OB.

Often a Latin skirt is sewn with sewn-in swimming trunks. It is convenient, practical and beautiful. The pattern of such swimming trunks - see below.

Distance T1T3 = TT2 = 1⁄2 FROM, and BB2 = B1B3 = 1⁄2 OB.

How can you sew a skirt for a Latin: video master class

Flounced Skirt

To make a skirt you need:

only 1 m of fabric with a width of 1.5 m: 0.3 m for the top and 0.7 m for the shuttlecock;
elastic to match the color of the fabric - 2 cm wide, 1 m long;
threads, sewing tools.

How to sew a skirt

We carry out the marking on the fabric according to the proposed drawing. The constructions on it are made on a scale of one to ten, that is, one cell is 5 cm.

Two equal upper rectangles are the upper details of the skirt. Their height is 30 cm, length - 1⁄2 OB + 4 cm.

The two lower large squares are the shuttlecock patterns. The sides of the squares are 0.7 m.

We cut out the upper parts of the skirt, put them together, bend them in half. This is done to ensure absolute equality and symmetry of the parts. We draw the upper and lower cuts with smooth lines, draw a side cut line. We cut along the drawn lines, unfold, having received two absolutely identical parts.

The sequentially described technology is shown in the following photo.

We sweep the upper parts of the skirt along the side seams, leaving a 1 cm allowance. We try on, if necessary, adjust the position of the side seams. The volume at the waist should be such that the skirt can be easily removed over the head. We sew side seams, process the cuts with an overlock.

On a square pattern in the center, draw a small square with a side of 12 cm.Connect the corners with a straight line, as shown in the figure.

We cut along the drawn line. Using this pattern, we cut out two parts of the shuttlecock.

We fill in the folds, forming the shape of the shuttlecock.

Apply the flounce to the front panel of the skirt. We start from the center and sew in the direction of the side seam, first in one direction, then in the other direction. Similarly, we sew the second flounce on the back of the skirt. If necessary, at this stage, you can correct the length of the skirt by changing the level of the seam of the flounce.

Sew the shuttlecock along the side seams. Along its bottom edge, we perform two folds of 5 mm each and sew.

Determine the desired length of the elastic by fitting. We add 15 mm to it for grinding. Sew an elastic band into a ring.

Along the upper cut of the skirt, we make a 5 mm turn, secure with a basting seam. On the elastic, we outline the lines of the side seams, the centers of the front and back. We cut an elastic band with a skirt along these points. Apply the elastic by stretching it between the anchor points. We carry out machine stitching.

Ballroom dance dress latina: video MK

Asymmetric skirt

For sewing a product you need to prepare:

satin in three contrasting colors - for the skirt panel and for the frills;
bias tape in the color of the fabric;
narrow elastic band;
threads, sewing accessories.

How to make a pattern

We need measurements:

waist circumference - OT;
length from the waistline to the knee;
length from waist to floor.

The smaller radius R is determined by the formula R = OT: 2.

The average length is calculated as half the sum of the minimum and maximum lengths.

Two intermediate lengths D1 and D2 are defined as the average of adjacent lengths.

Accordingly, D1 = 1⁄2 (knee length + average length), D2 = 1⁄2 (average length + floor length).

We put aside all the calculated lengths on paper as shown in the drawing. We connect the extreme points of the curved line, drawing out the bottom line.

Fold the fabric in half, place the pattern along the fold line. We outline with chalk along the contour.

We fix it with pins so that the layers of the material do not move.

We cut out the panel, leaving an allowance of 5 mm.

Preparing the bias inlay.

We fill it with the cuts of the skirt.

We try to get a neat edge.

We sew along the edge of the inlay.

We process the upper cut in the same way.

Determine the desired length of the elastic by fitting. We add 15 mm to it for grinding.

Sew an elastic band into a ring.

On the elastic, we outline the lines of the side seams, the middle of the front and back. We cut an elastic band with a skirt in these places. Apply the elastic by stretching it between the anchor points.

We carry out machine stitching.

Cut out strips for frills from contrasting fabric. The width of the frills is 10 cm. In our master class, the skirt is made with two frills - blue and yellow. For each we grind a long workpiece.

We wrap one slice of frills with a zigzag stitch or overlock.

We process the second cut with an oblique inlay.

Adjust the bottom frill to the edge of the panel.

We put the upper frill on the skirt with the wrong side up, unfolding to the waist line. We attach. We turn it away and press it on.

The skirt is ready!

Mothers of girls now and then worry about outfits, because their princesses change them very often. Those who are wondering how to sew a skirt for a girl to dance can be calm, because for this you do not need to graduate from a sewing school or take tailor courses. To sew a skirt for a girl to dance, you should read the material below and use these recommendations.

Many mothers have situations when it is necessary for a short time to sew a skirt for a Nathan girl, and they do not know where to run and what to do. But in fact, everything is much simpler, perhaps there is a wonderful piece of fabric at home that you can safely use to create a skirt.

For example, every mother can sew the familiar and simple style of the "Tatyanka" skirt. In order to create this model, you need to prepare in advance an elastic band, the width of which is about 3 cm, a small piece of initka fabric.

It is worth noting that the fabric should be rectangular. As for the length of the cut of a piece of fabric, then it should be the same as the skirt will ideally come out, and a few centimeters should be released on the seams. It is desirable that the width of the skirt be several times larger than the girth of the girl's hips, in which case the "Tatyanka" will be magnificent and incredibly beautiful.

When the length and width are measured, you should fold the side cuts inside the skirt and grind them off, process the edges well. Next, bend the upper cut and process it with a seam, the distance between the lines should be about one and a half centimeters in order to be able to pull the elastic.

Take a safety pin and use it to pull through the rubber band, connect the ends together in one ring. Now it's time to start processing the bottom seam, bend it with a closed cut, the width should be about 1 cm. Iron and try on the finished product, suitable for both summer and winter wear, the main thing is to choose the right fabric.

Another option for moms who ask how to sew a skirt for a dancing girl is a tutu skirt made of tulle. There is no doubt that such a skirt will delight any princess who loves to dance. In order to make such a miracle, you need to prepare in advance:

- about 50 rectangular mesh or soft tulle;

- an elastic band intended for clothing;

- satin ribbons, bow-shaped decorations, fabric flowers and so on.

First of all, you need to cut the tulle into equal rectangles of the desired length. In order to quickly cut it, you can fold it in several layers. Next, sew or tie an elastic band, put it on the back of a chair, so that it is easier to work with it.

Take the prepared tulle ribbons and tie them with an elastic band around the whole circle. It is worth noting that you can tie tulle with an ordinary double knot, or you can tie it in the form of a loop. If you want to make such a skirt faster, you can use a stapler instead of tying it. To do this, wrap the tulle tape around the elastic band, squeeze it and fasten it with a stapler so that the bracket is not visible. The main thing here is to fasten each ribbon separately so that the tutu skirt can be stretched without much trouble.

In order to make this element of the girl's wardrobe more elegant, you can purchase tulle of several colors and string them one by one. You can decorate a tutu skirt with bows and various ribbons.

It is worth adding that if you take long tulle ribbons, then you can make a wonderful dress, tie it with a belt and go to the circle. There is no doubt that the princess will be delighted.

How to sew a dance skirt in a short time? Another simple option for a simple skirt for a girl is with an elastic band. It is interesting that such a model of a skirt can be sewn in just 20 minutes. The following blanks should be prepared in advance:

- knitted fabric with ruffles in the desired shade;

- wide elastic band.

First of all, it is worth noting that any fabric is suitable for this model, but the fabric to which the ruffles are already attached is very fashionable, and the cut of such fabric does not crumble. In addition, in this case, the bottom and side seam will not need to be processed additionally, so you will be able to significantly reduce your time.

So, after purchasing a fabric with ruffles, you need to choose the length of the product. It depends on how many ruches the skirt has. The width must be calculated as follows: multiply the hip girth by 1.5. If the fabric does not have ruffles, the girth of the hips will need to be multiplied by 2.5.

Determine the length of the wide elastic band as follows: take the waist circumference and subtract 5 cm.

First of all, you need to sew the sections of the gum taken. The edges should be carefully processed so that they do not bloom in the process of socks and do not lose their attractive appearance. Next, pin the upper edge of the skirt with pins to the elastic, while collecting and distributing the fabric evenly. In order to sew the fabric firmly, you can use the "live" method. All that remains is to sew the edges of the elastic from the sewing of the fabric, and that's it, the dance skirt is ready.

It is worth noting that a child will be able to wear such a model of a skirt for more than one year, since an elastic band that stretches will give a significant margin for growth.

As you can see, in order to understand how to sew a skirt for a Nathan girl, you do not need to think for a long time, you should use the above recommendations. Undoubtedly, the daughter will be happy that her mother created a skirt for performances with her own hands, the main thing is to believe in yourself and are not afraid of experiments ...